On this page you will a collection of short notes about different pieces of hardware I somewhere had the possibility to try out, on which there was no documentation on the internet, and for which a short explanation is sufficient.
All comments, suggestions etc. are welcome. Please contact me at firstname.lastname@example.org.
Nokia S60 ' no gateway reply '
You get the error 'No gateway reply' when browsing over wifi / wireless lan?
For me it helped to enter the DNS server (although it should have been configured by DHCP anyways).
Go to Settings - Connectivity - Destinations - Internet - ESSID_OF_YOUR_WIFI - Options - Advanced Settings - IPv4 settings - DNS addresses and enter the IP Address of your DNS server (usually the address of your access point
After that it worked for me, setting the IP address of the phone by hand was not necessary.
Debian lenny - problem with keyboard in X / with xserver
After my dist-upgrade to Debian lenny setting the keyboard layout in
/etc/X11/xorg.conf didn't work (on the console everything was fine). Probably
this is related to the upgrade of the xkb-data package.
Lexmark E210 GDI printer + Netgear PS121 printserver
I wanted to have a small network print server in my LAN so I could switch off
the computer the printer was connected to before.
I bought the printserver, connected it to my LAN and ran the Setup-Program in windows. It found the printserver without problems and I assigned a fixed IP-adress.
Then I added a new (local) printer and chose the printer-share (LAN-Manager Printer Interface) of the printserver as the interface to be used. Then I finished the setup process and printed the test page - and it worked.
The other possibility is to use the IP-address as the interface instead of the
With Linux it is just as simple.
Some interesting links:
Omnibook XE3 GC hotkeys
Finally I upgraded my old laptop to Debian testing/lenny and kernel 2.6. So now I am using the great omnibook kernel module from http://omnibook.sourceforge.net/. Everything is working well, only the hotkeys took me some minutes' search and playing around.
The problem is that compared to the old kernel patches for kernel 2.4 you don't get the keycodes of the hotkeys directly to use them with the hotkeys package, instead you have to use setkeycodes (as root) first to map the scancodes.
The second and more severe problem is that keycodes higher than 240 cannot be used, so you cannot use the same keycodes as with kernel 2.4.
These are the error messages:
When you have loaded the omnibook module without setting any scancode/keycode (at least you see that the module works):
When you are setting scancodes/keycodes and use keycodes higher than 240:
Solution: use for example the following keycodes (check first with getkeycodes
wheter these keycodes are not use yet):
The keycodes used for hotkeys in the .def-file are the following (small blue
one touch keys from left to right):
Some interesting links:
Written 2007-02-07 - last update 2007-11-12
© 2015 by wf