fuschlberger.net - Howto on Linux / bluez, Belkin Bluetooth Adapter and Siemens S55
Howto setup Bluetooth with Belkin F8T001 ver 2, Siemens S55 and Linux /
On this page you will a find a short guide on how to set up this bluetooth adaptor under Linux and how to connect your Siemens S55 mobile phone.
You might think 'Oh, yet another bluetooth howto'. Well, when I searched the web I found only questions concerning these devices, but no answers whatsoever.
All comments, suggestions etc. are welcome. Please contact me at email@example.com.
In respects where information on this page is outdated (eg everything regarding
the pairing process between phone and computer) please refer to the page on the Nokia 6125.
Some months ago I bought a Siemens S55 mobile phone. I wanted to be able to
connect it to my laptop in case I was somewhere on the road and had to get
Setting up the Bluetooth USB Dongle
I assume you have the USB-subsystem up and running.
If you are using hotplug, it will work out of the box,
with usbmgr some customization will be necessary.
Step 1: Kernel-Config
It should work with a vanilla-kernel at least since kernel 2.4.21, I am
using 2.4.22 and 2.4.24.
Compile (recommended: as a module)
The necessary Parameters in the kernel-.config-file are
Step 2: Install Necessary Software
Install the following software packages:
for debian users:
add the following line to /etc/apt/sources.list:
for testing: deb http://bluez.sourceforge.net/download/debian/ ./
for woody: deb http://bluez.sourceforge.net/download/debian/woody/ ./
run: apt-get update
install the necessary packages: apt-get install libbluetooth1 bluez-utils bluez-pin
for testing purposes: apt-get install bluez-hcidump
for non-debian users:
Go to www.bluez.org
Download and compile/install bluez-libs, bluez-utils,
bluez-pin, for testing purposes also
Step 3: Configure USB-Subsystem
Good news if you are using hotplug: Everything will work out of
If you are using usbmgr: add these lines to
# Bluetooth Dongle Belkin F8T001 ver 2
vendor 0x50d product 0x81 module bluez, l2cap, hci_usb, rfcomm
Now the kernel-modules will be loaded automatically when connecting the
In the same submenu set 'visible to others' to 'always visible'.
Don't forget to switch back to 'Not visible' after finishing the setup.
Scan for the phone to get the hardware address. You could also get it from the
bluetooth-submenu on the phone, but this is also a first test of the connection
between computer and mobile.
On the right you see 'My BT Name' which you can configure on the phone.
$ hcitool scan
00:01:E3:6F:7E:47 You got me
You can ping the phone to test the connection:
$ l2ping 00:01:E3:6F:7E:47
Add the following lines to your /etc/bluetooth/rfcomm.conf:
# Bluetooth address of the device
# RFCOMM channel for the connection
# Description of the connection
# IMPORTANT: comment must be the same as BT name of the phone
comment "You got me";
In order to use the phone as a regular modem you need to bind
/dev/rfcomm0 to the hardware-address of the phone.
$ rfcomm connect rfcomm0 00:01:E3:6F:7E:47
When connecting the two devices for the first time you might be asked to enter a
PIN-Code on the phone. Enter some numbers and press 'Okay' rfcomm will ask you to enter the PIN-Code for the mobile
Enter the same numbers and press <Enter>/Click Okay.
Both devices will now connect to each other.
Connected /dev/rfcomm0 to 00:01:E3:6F:7E:47 on channel 1
Press CTRL-C for hangup
Now you can use /dev/rfcomm0 just like a serial device to connect
to the BT-device.
When and if asking for the PIN-Code rfcomm will open a X-window.
This means that the User you run rfcomm as needs to be able to
access your X-Display (via ssh and X-forwarding or the $DISPLAY-Variable and
When using one BT-Dongle on several computers don't forget to delete the
known-device-name of one computer when connecting to another, else the mobile
phone won't connect.
Now you can use the mobile phone like a regular modem via
/dev/rfcomm0. Fire up any terminal program like
minicom to test and play.
Before closing the connection by switching off bluetooth on the mobile phone it
might be advisable to run rfcomm release all (though I don't know
what would happen if you did not).