Initialen



Change color to default
Change color to red
Change color to blue
Change color to green
Change color to yellow
Change color to cyan
Change color to magenta
Change color to orange
Change color to b/w

Linux on Dialogue Flybook Howto - fuschlberger.net

Change color to default
Change color to red
Change color to dark red
Change color to blue
Change color to dark blue
Change color to green
Change color to dark green
Change color to yellow
Change color to dark yellow
Change color to cyan
Change color to dark cyan
Change color to magenta
Change color to dark magenta
Change color to magenta
Change color to dark orange
Change color to grey
Change color to b/w

Printme!

Network

The network chip is a RealTek RTL8139 which works well with the module 8139too.o

Add the following line to /etc/modules.conf (in Debian to /etc/modutils/aliases and run update-modules)

alias eth0 8139too

for V33i:
alias eth0 r8169

and the driver will be loaded automatically when bringing up the interface.

To configure the interface use the setup-tool of your distribution.
In Debian insert the following lines (adapted to your network setup) to /etc/network/interfaces.

auto eth0
iface eth0 inet static
  address 192.168.0.1
  netmask 255.255.255.0
  network 192.168.0.0
  broadcast 192.168.0.255


Change color to defaultChange color to redChange color to blueChange color to greenChange color to yellowChange color to cyanChange color to magentaChange color to orangeChange color to b/w

© 2014 by wf
webslave (at) fuschlberger.net
Medieninhaber:
Wolfgang Fuschlberger, Salzburg

[Valid-HTML-4.01]